Kitvision Escape HD5W - Instructions for Use; Powering and Charging

Recording audio within a video
If using the camera with the waterproof case, audio will be
recordedalthoughitwillbelessaudible.Forbestaudioquality,
the camera will need to be used without the case. When using
the camera without a case, please take extra care and make sure
it does not get wet.
Using Photo mode
By selecting Photo mode you can capture a single image with
your camera. You can change the Resolution, Exposure, Quality,
White Balance, ISO and Anti-shake settings in the Settings mode.
1. Turn on the camera and press the Power/Mode Button (3)
to enter the Mode Menu and select Photo mode.
2. Use the LCD Display (11) to view your shot, and then
press the Shutter/Ok Button (1) to take a still image.
3. After the image has been taken, the camera will make
a ‘shutter’ sound effect and the LCD will blink once.
Using Burst mode
By selecting Burst mode you can take a series of photos within
one ‘burst’, the Burst settings can be changed in the Settings Mode.
1. Turn on the camera and press the Power/Mode Button (3)
to enter the Mode Menu and select Burst mode.
2. Use the LCD Display (11) to view your shot, and then press
the Shutter/Ok Button (1) to take a series of still images.
The camera will make a series of ‘shutter’ sound effects
dependingonthequantityofphotosselected;theOperation
Indicator(9)willashrepeatedlyduringthissequence.
1110