Kitz F Series - Page 51

Document No.：KE-4010-11                                            Page: 48/58

6.  ActuationofKITZ3-wayBallValves

KITZ3-wayballvalvesmaybeoperatedwithFSeriespneumaticactuatorsbymeansofaddingspecialposition
indicators to the standard one as instructed below ( Fig.6 and Fig.7 ).  The position indicator plate is not
neededforactuationof3-wayballvalves.








Fig.6
 Fig.7 
 
(1)Loosenasnapring(withsnapringpliers)andremoveapositionindicatorandanindicatorplatefromthe
housing.

(2)AddonespecialindicationmarktoLportdesign,ortwospecialindicationmarkstoTportdesign.  These
specialindicationmarksareoptionallyavailable.  RefertoTable6forproductcodesofindicationmarks.

Table6.Productcodeofindicationmarks





*Yellowmarksareforredpositionindicators.  Blackmarksareforyellowpositionindicators.

(3) Mount the position indicator on the shaft of an actuator, following the valve opening direction.  The
indicatorplateisnotneededforoperationof3-wayballvalves.

Actuator Color* Productcode
FA/FAS-1〜 4 Yellow
AD14-4001-B0
FA/FAS-1〜 4
Black AD14-4002-B0
Indication
marks

FA/FAS-5,6
Black AD14-4602-20
PositionIndicator
Indicatorplate
Specialindication
marks 
      forTportdesign/forLportdesign