Kitz Y Series User Manual

DocumentNo.:KE-0015-00                                        Sheet:17/37

IIIStrainerInstallation


4. InstallationProceduresforthreadedstrainers
 4.1 Ensurethatpipeendsarethreaded.

4.2 Cleantheendthreadsofstrainersandtheinsideofconnectingpipeswithdetergentand
cleaningclothtoremoveallforeignobjectssuchascuttingsandoil.

4.3 Applysealingpasteortapeinthethreadedareasofpipes.

4.4 Useappropriatetoolstothreadstrainersintopipes.

4.5 DO NOT applyexcessive torque,when threadingstrainersinto pipes. Torques should
notexceedthevalueshownbelow.
StrainerSize 1/8 1/4 3/8 1/2 3/4 1
N-m 20〜29 20〜29 20〜29 20〜29 39〜49 49〜59

StrainerSize 1-1/4 1-1/2 2 2-1/2
3or
larger
N-m 59〜69 69〜78 78〜88 108〜118 127〜137

4.6 Gradually increase the pressure and temperature of pipeline,, when conducting the
pipelinetest.Retightenallthreadedareasofvalves,ifneeded.

Kitz Y Series Specifications

General

Brand	Kitz
Model	Y Series
Category	Control Unit
Language	English