To Next Page

To Previous Page

DocumentNo.:KE-0015-00                                        Sheet:18/37



IIIStrainerInstallation



5.Checkthefollowingitemsbeforeinstallationofstrainers.



5.1The service conditions should be within the range of the relevant strainer

specification.



5.2Strainerflangesshouldcorrespondwithpipeflanges.



5.3Gasketcontactsurfacesofpipeandstrainerflangesmustbefreefromscratchesor

anyotherdamages.



5.4The appropriate space should be kept between pipe flanges for the strainer

face-to-facedimensionsincludingthegasketthickness.



5.5Pipesandstrainersshouldbeaccuratelyaligned.



5.6Pipeflangesshouldfaceparalleltoeachother.Theboltholesofflangesshouldbe

symmetricallylinedupagainstthecenterlineofflanges.



5.7Beforeinstallationof strainers, theconnectingpipesshouldbecleanedtoremove

anyforeignobjectssuchassand,dustandweldingspatters.



5.8Do not give extraordinary shock to strainers by throwing, dropping, dragging or

topplingthemdown.



5.9 Removeflangecoversfromstrainersjustbeforeinstallation.



5.10

 Checkallthreadedareasafterinstallationandretightenthem,ifneeded.



Kitz Y Series User Manual

Questions and Answers: