Need help?Do you have a question about the Kjellberg HiFocus 161i and is the answer not in the manual?
Covers essential safety information and warnings for operating the HiFocus 161i with PGE 3-161.
Provides guidance on identifying and resolving common errors and issues with the system.
Addresses risks associated with high voltage during operation and maintenance.
Detailed specifications for the HiFocus 161i neo power source.
Step-by-step guide for initial setup, placement, and connection of the power source.
Description of the power source's protective features and their functions.
Guidance on diagnosing and resolving issues with the power source.
Specifications for PerCut 200, 210A, and 210M plasma machine torches.
Specifications for PerCut 201, 211A, and 211M plasma machine torches.
Steps and safety warnings for replacing consumables on the plasma torch.
General| Output Current | 160 A |
|---|---|
| Duty Cycle | 100 % at 110 A, 60 % at 160 A |
| Weight | 41 kg |
| Cutting Capacity (Mild Steel) | 25 mm |
| Cutting Capacity (Stainless Steel) | 20 mm |
| Protection Class | IP 23 |
| Power Supply | 3-phase |
| Input Voltage | 3 x 400 V |
| Welding Current Range | 5 - 160 A |
To Next Page
