Activated carbon lter
Activated carbon lters can be used to remove odors. Normally, the charcoal lter
should be changed after three or six months, depending on your cooking habits. The
installation of the activated carbon lter is carried out as follows:
1 Disconnect the hood from the main power supply before installation.
2 Press the lter cap and remove the net lter.
3 Turn the carbon lters counterclockwise on both sides of the motor. Replace the old
carbon lters with new carbon lters.
4 Replace the net lter.
5 Reconnect the power plug to the wall outlet.
Note: Make sure that the lter is tightly closed. Otherwise, it can break loose and
become dangerous. When the activated carbon lter is connected, the suction power
is reduced.
open
close
To Next Page
Loading...
