Klarstein 10033106 - Installation; Mounting the Hanging Scaffold; Securing the Scaffold to the Ceiling; Reserved Socket Space

14
EN
INSTALLATION
1
Put the hanging scaffold
at the position you want to
install, and draw the holes.
After drilling holes, put the
8pcs of wall-plug (Ø 10
mm) into the wall and x it.
2
and screws to t the hanging
scaffold on the ceiling
3
In the middle of hanging
scaffold, socket space is
reserved.
Washer
(Ø6 mm)
Screws
ST6*60
Reservation place for power
Hole: Ø 8-10 mm
Depth: 65 mm