46
EN
WATER DRAINAGE
During dehumidifying mode, remove the upper drain plug from the back of the
unit. Attach the drain hose to the hole. Place the other end of the hose in the
drainage way or other drain areas.
Make sure the hose is secure and there are no leaks. Direct the hose toward the
drain, making sure that there are no kinks that will stop the water owing. Place
the end of the hose into the drain and make sure the end of the hose is down to
let the water ow smoothly. Do never let the end of the hose show upwards.
When the water level of the bottom tray reaches the maximum level, the digital
display area shows "P1" and the WATER FULL indicator light illuminates.
Carefully move the unit to a drain location, remove the bottom drain plug and let
the water drain away. Reinstall the bottom drain plug and restart the machine
until the P1 symbol disappears. If the error repeats, call for service.
NOTE: Be sure to reinstall the bottom drain plug before using the unit.
drain oulet
bottom tray drain outlet
To Next Page
Loading...
