29
EN
0 Light off
1 Light on
0 Motor off
1 Low speed
2 Medium speed
3 High speed
MAINTENANCE AND CARE
Replacing the light
1 Switch off the cooker hood and disconnect the cooker hood from the mains by
pulling the mains plug or switching off the fuse.
2 Remove the grease lter.
3 Remove the lamp by loosening its attachment from the hood body (this may require
the application of pressure or force).
4 Disconnect the plug from the lamp.
5 Replace the lamp with a new one of the same type and ensure that the lamp is
properly connected to the light cable.
6 Reconnect the power supply by plugging in the mains plug or by switching on the
fuse.
To Next Page
Loading...
