EasyManua.ls Logo

Klarstein ESPRESSIONATA EVO - Operation; Getting Started; Filling the water tank

Klarstein ESPRESSIONATA EVO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
EN
OPERATION
Getting Started
Take the espresso machine out of the packaging carton and check that the
accessories are complete.
Clean all detachable parts.
Depending on the coee preparation, clean the espresso machine 2-3 times
with clear water. Make sure that there is no coee powder in the device when
cleaning the espresso machine.
Note: When using for the rst time, there may be no water coming out of the
device. Turn the steam control anti-clockwise to fully open it and press the one-
cup button (3) or the two-cup button (8). When water comes out of the steam
vent, press the one-cup button (3) or two-cup button (8) to stop the water ow
and turn the steam knob clockwise to close it.
Filling the water tank
1. Take out the water tank on the right side of the device.
2. Fill the tank with fresh, clean water, making sure not to exceed the MAX level.
Carefully place the water tank back into the espresso machine.
3. The water tank can also be easily lled without removing it by pouring in the
water directly from a jug.
Note: It is normal for water to collect in the area under the water tank. This
area should therefore be regularly wiped dry with a clean sponge.
Take out the
water tank
Fill
with water
Insert
water tank

Related product manuals