Klarstein ESPRESSIONATA EVO - Preheat the espresso machine; Preparation of an Italian espresso coffee

32
EN
Preheat the espresso machine
1. Plug the power cord into the power outlet and press the "On/O" button.
When the red on/o indicator light is on and the coee indicator light is
ashing, the espresso machine will start preheating. When the thermometer
shows between 80 and 120 ℃ (position of the coee symbol) and the coee
indicator light is on, the preheating process is complete. If you want to switch
o the espresso machine, press the "On/O" button again.
2. Place the lter screen in the portalter, insert the portalter into the espresso
machine in the "insert" position, and then turn it clockwise to the "locked"
position.
3. Place the coee cup under the lter and press the "one cup" button (3) to
preheat the espresso machine and coee cup with hot water.
Preparation of an Italian espresso coee
1. Fill the lter with ground coee, smooth it out and press the ground coee
rmly into the lter.
2. Place the lter in the portalter, insert the portalter into the espresso
machine in the "insert" position, and then turn it clockwise to the "locked"
position.
3. Place the coee cup under the portalter when the coee indicator light stops
ashing, then press the one-cup button (3) or the two-cup button (8) to brew
the coee.
4. The device will stop automatically when one or two cups have been prepared.
Note: Do not leave the espresso machine unattended while it is in use.
• After brewing coee, allow the espresso machine to cool for 5 minutes. Turn
the portalter to the left and remove it.
• When completely cool, wash the portalter and lter screen with fresh water
and clean the body and drip tray with a damp cloth.