Klarstein ESPRESSIONATA EVO - Time presets for the coffee preparation; Custom setting time for coffee brewing; Preparation of cappuccino or other coffee specialities

33
EN
Time presets for the coee preparation:
• The two-cup button will turn o automatically after 30 seconds.
• The one-cup button will turn o automatically after 15 seconds.
• No operation: the espresso machine switches itself o after 29 minutes.
Custom setting time for coee brewing:
The preset times for the one-cup and two-cup functions are 15 seconds and 30
seconds. If you want to change the time, do the following:
• Press the one-cup button (3) or the two-cup button (8) for more than
3 seconds. When the indicator light ashes, the pump starts to work and the
timing starts.
• If you press the one-cup button (3) or two-cup button (8) again, the timer
stops. The next time you press the one-cup button (3) or two-cup button (8),
the espresso machine will start according to the time set last time. If you pull
the plug out of the socket for more than 3 seconds, the PCB program will be
reset to the factory-set time.
Note: To avoid splashing, never remove the portalter while the machine is
brewing coee.
Preparation of cappuccino or other coee specialities
Cappuccino is made from
espresso and frothed milk.
Therefore, you must rst prepare
espresso. The description below
mainly explains the process of
frothing milk.
Note: The lter must be inserted
during steam generation.
1. First prepare espresso and provide suciently large cups.
2. Press the steam button. When the steam indicator light ashes, it indicates
that the espresso machine is going into steam preheat mode. When the steam
indicator light comes on, the preheating process is complete.
3. Pour pure whole milk into a milk jug once the steam has preheated.
4. When the steam comes out, release it into the air to remove the residual hot
water in the tube, and then turn the knob clockwise when the tube stops
running.