EasyManua.ls Logo

Klarstein INNOCHEF - Care and Cleaning; Boilovers, melts, and hot sugary spills on the glass; Spillovers on the touch controls

Klarstein INNOCHEF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
EN
CARE AND CLEANING
Note: Before any maintenance or cleaning work is carried out, disconnect the
appliance from electricity supply and ensure the appliances is completely cool.
What? How? Important!
Boilovers, melts,
and hot sugary
spills on the
glass
Remove these immediately with
a sh slice, palette knife or
razor blade scraper suitable for
ceramic glass cooktops, but
beware of hot cooking zone
surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil at
a 30° angle and scrape the
soiling or spill to a cool area
of the cooktop.
3. Clean the soiling or spill up
with a dish cloth or paper
towel.
4. Follow steps 2 to 4 for
‘Everyday soiling on glass’
above.
Remove stains left by
melts and sugary food
or spillovers as soon as
possible. If left to cool on
the glass, they may be
difcult to remove or even
permanently damage the
glass surface.
Cut hazard: when the
safety cover is retracted,
the blade in a scraper
is razor-sharp. Use with
extreme care and always
store safely and out of
reach of children.
Spillovers on the
touch controls.
1. Switch the power to the
cooktop off.
2. Soak up the spill
3. Wipe the touch control area
with a clean damp sponge
or cloth.
4. Wipe the area completely
dry with a paper towel.
5. Switch the power to the
cooktop back on.
The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you
wipe the touch control area
dry before turning the cooktop
back on.

Table of Contents

Related product manuals