Klarstein PURELINE - Troubleshooting

25
EN
TROUBLESHOOTING
Common Malfunction Possible Reason Solutions
Very little or no
water ow.
PE pipe is bent. Straighten pipe.
Inlet water T valve is
shut down.
Wait for the water
source supply.
Source water is shut
down.
Wait for the water
source supply.
PP+C cartridge is
blocked.
Replace the cartridge.
Water pressure is low. Add pressure boost
treatment.
Feed water tempera-
ture is lower than
required.
Increase feed water
temperature.
Machine does not work.
Electricity fault. Check power supply.
Adaptor loses eciency. Replace the adaptor.
Machine short of water. Check feed water.
If feed water is OK,
reconnect power supply.
Water taste is abnormal.
Not using for a long
time.
Flush the cartridge
for 5 minutes. If this
does not solve the
problem, replace the
cartridges.
Poor feed water quality. Check feed water quality.
Cartridges not re-
placed for a long time.
Replace the cartridges.
Noises during ma-
chine operation
Power and voltage
do not match.
Call professional
personnel to check
and repair.
Feed water ow to little Increase feed water
ow rate.
Adaptor is damaged. Call professional
personnel to check
and repair
Failure caused on
water pump.
Call professional
personnel to check
and repair