Klein Tools IR1 - General Specifications IR1; Operating Environment and Conditions; Measurement Capabilities and Features; Physical and Power Specifications

2
GENERAL SPECIFICATIONS - IR1
Klein Tools IR1 is an entry-level infrared thermometer with targeting
laser. It offers a wide measurement range, a 10:1 distance–to-spot
ratio, a targeting laser, and user-selectable from Fahrenheit to Celsius
temperature scales.
• Environment: Indoor or outdoor
• Operating Altitude: 6562 ft. (2000 m)
• Relative Humidity: <85% non-condensing
• Operating Temp: 32° to 122°F (0° to 50°C)
• Storage Temp: -4° to 140°F (-20° to 60°C)
• Measurement Range: -4° to 752°F (-20° to 400°C)
• Units: Settable to °F or °C
• Emissivity: 0.95 fixed
• Optical Resolution (Distance-to-spot): 10:1
• Dimensions: 6" x 4.1" x 1.7" (152 x 104 x 43 mm)
• Weight: 7.4 oz. (210 g) including battery
• Battery Type: 1 x 9V battery
• Battery Life: (Estimates assume 9V Zinc-Carbon Battery)
5 hours continuous use w/laser and backlight on.
• Display: Backlit LCD with white backlight
• Display Resolution: 0.1°F (0.1° C)
• Laser: FDA and IEC Class 2
• Wavelength: 630 – 670 nm
• Max Power: 1mW
• Beam Divergence: 1.5mrad
• Standards: Certified to IEC EN 61326-1:2013, EN 61326-2-3:2013,
IEC EN 60825-1:2014
Complies with 21 CFR PART 1040.10 and 1040.11
except for deviation pursuant to
Laser notice No.50,dated June 24, 2007
• Pollution degree: 2
• Drop Protection: 6.6 ft. (2m)
Specifications subject to change.
ENGLISH
MEASUREMENT SPECIFICATIONS
• Response Time: <500ms
• Data hold: Yes
• Spectral Response: 8000-14000nm
≥32 °F (≥0 °C ) ±4 °F (±2 °C ) or ±2%, whichever is greater
<32
°F (<0 °C )
±(4 °F + 0.1 °F per degree below 32 °F )
±(2.0 °C + 0.1 °C per degree below 0 °C )
• Repeatability: ±1.0% of reading or ±2°F(±1°C)
(whichever is greater).
• Temperature Correction Coefcient: ±0.1°F per °F (±0.1°C per °C), or ±0.2%
of reading (whichever is greater) when ambient temperature is above or
below 70 – 77°F (21 – 25°C).
Specifications subject to change.