Klipsch LightSpeaker - Installation: SimpleTabs Adjustment; Step 5: Adjusting Mounting Tabs

Tech Support: 1-800-KLIPSCH
11
B) The thinner one is used when installed into a 5”
fixture. As long as the trim ring covers the edges of the
lighting fixture and any rough drywall edges you may
use either trim ring; it will not affect the performance of
your LightSpeaker
®
5.
Step 5: Adjusting the SimpleTabs™.
Your LightSpeaker
®
5 is equipped with a unique
mounting system. The three SimpleTabs™, on the back
of the speaker can be rotated outward and when the
LightSpeaker
®
5 is pressed into the housing, hold it
centered and securely in place.
You will now adjust the Simple Tabs™ on the back of the
LightSpeaker
®
5 to either A (6” recessed light fixture) or
B (5” recessed light fixture).
If you are installing into a 5” recessed lighting fixture,
rotate each of the SimpleTabs™ out to position “B” on the
top of the LightSpeaker
®
5 unit.
SimpleTabs
TM