Klipsch LightSpeaker - Installation: Zone and Stereo Settings; Step 5 (Cont.): Fixture Mount Adjustment; Step 6: Setting Zone and Stereo Switches

12
Tech Support: 1-800-KLIPSCH
If you are installing into a 6” recessed lighting fixture,
rotate each of the SimpleTabs™ out to position “A” on the
top of the LightSpeaker
®
5 unit.
Step 6: Setting the Zone and L/R Stereo Switches.
A) Set the zone switch on the back of the
LightSpeaker
®
5 to one, unless you are setting up a
two zone system. For more on zones see Complete
System Manual or go to www.Klipsch.com.
SimpleTabs
TM