Klipsch RW-12 User Manual

3
SPECIFICATIONS
Model: RW-12
Rated Power Output 340 Watts Continuous into 4 Ω
Maximum Power Output 825 Watts(peak) into 4 Ω
Frequency Band-width 16 - 115Hz
THD < 1.0% @ 1 Watt
< 2.0% @ Rated Power
< 5.0% @ Maximum Power
Signal to Noise 98dB or better
60 Hz Hum <500µV
Input Sensitivity for Rated Output Line Input = 150mVrms @ 80Hz
Speaker Input = 580mVrms @ 80Hz
Circuit Gain Line Input = 48dBv @ 80Hz
Speaker Input = 25dBv @ 80Hz
Input Impedance Line Input = 10KΩ
Speaker Input = 200Ω
Auto-on Sensitivity Line Input = 10mVrms (20Hz - 2kHz)
Speaker Input = 130mVrms(20Hz - 2kHz)
Auto-On Delay 1-2 Seconds
Auto-Off Delay > 15 minutes
Low Pass Variable 40 - 120Hz with 24dB/Octave Slope
Phase Control Variable 0 - 180°

Klipsch RW-12 Specifications

General

Brand	Klipsch
Model	RW-12
Category	Amplifier
Language	English