404G2 SERIES TRACTOR OPERATION MANUAL
18
2.2.2ComponentIdentificationPlates
Engine Identification Plate Location
The engine identification plate is
attached to the left hand side of
the engine block. The information
contained on this plate includes the
engine model and serial number.
ROPS Certification Plate
Your machine is built to the ROPS
standard and has an identification
identification label is shown below.
Label fitted to the ROPS or cab.
Tractor Drawbar Or Clevis type Certification Plate
The Tractor
drawbar or Clevis type on
your machine is built to a standard and has
an identification label fitted to the top of
the trailer hitch. A typical identification
label is shown below.
To Next Page
Loading...
