KNEGT 404G2 Series - Chapter 6 Adjustment of the Tractor; Adjustment of the Engine; Adjustment of the Clutch

404G2 SERIES TRACTOR OPERATION MANUAL
65
Chapter6Ad justmentofthetractor
6.1 Adjustment of the engine
Details of the engine Adjustment can be approached in the manual of engine
6.2 Adjustment of the clutch
Because of abrading, the clearance between the release lever’s head and the release
bearing become small and small, even make the lever and the bearing connect and
rotating together. As a result, the clutch can’t work efficiently any more. So it should be
check and adjust regularly.
Fig.6-1
1. Adjusting nut
2.Adjusting nut
3. Clutch pedal hold down
bolt
4. Clutch pull rod
5. Adjusting nut
6. Adjusting nut
7.Adjusting bolt
8.Security switch