EasyManua.ls Logo

KNEGT 404G2 Series - Storage

KNEGT 404G2 Series
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
404G2 SERIES TRACTOR OPERATION MANUAL
63
Driving on a public street or roadway without turn signals, slow moving vehicle
emblem, or reflective markings could lead to accidents causing serious personal injury
or death.
NoteKeep the tractor in a dry place where the tractor is sheltered from the
elements. Cover the tractor
NoteIf you want to use tractor after transporting, you must see 4.2.3 Operating
the Engine.
5.4 Storage
The tractor must be well stored after working or when it will not be used for a long time,
so it can be protect from corrosion and deterioration.
5.4.1PreparationforStorage
1. According to the manual of engine to store and maintain the diesel engine.
2. Thoroughly clean the tractor, especially the body parts, brush protective coating on
the painted metal parts, store the tractor under cover and in dry and well-ventilated
places.
3. Brush anti-rust paint on the unpainted metal parts.
4. Ensure that all controls are in neutral or off position (including the electrical switch
and the parking brake).
5. Do not leave the key in the electric switch.
6. Fill the fuel tank to the topper level.
7. Remove battery, clean battery top and coat terminal clamps and leads with Vaseline
or calcic lubricant, subsequently store the battery in dim and ventilated places with
temperature remaining above 0.
8. Put stands or other supports under the front axle/front wheel drive axle and rear
axle in order to bear the tractor weight. With the tractor being propped up, it is
advisable to deflate tires.
9. Drain away thoroughly the water in radiator for passing away in the winter season.
10. Cover the tractor with waterproof canvas to prevent from dust or water.
Refer to the manual of engine for the storage of engine.

Table of Contents

Related product manuals