404G2 SERIES TRACTOR OPERATION MANUAL
32
position.ON position enables on circuit allowing engine to run.
Cold Weather Start(3) —Preheat before start engine in cold weather. Refer the
section“Start in cold weather” in this chapter.
Start Position(4)—Turn key to start position to start engine.
2、 Instrument Panel
Techometer and Hourmeter
Techometer shows engine revolutions per minute, read
in hundreds.
Hourmeter shows hours of engine operation in full
hours and tenth.White mark shows the rotational
speed of engine. Blue mark shows the rotational speed
of PTO.
Fig. 4-4 Instrument Panel
1.Fuel Gauge 2. Dipped Beam Indicator 3. Low pressure Indicator 4.End-Outline
Position Indicator 5. Left Turn Signal Indicator 6. Tachometer 7. Right Turn
Signal Indicator 8. PTO Monitor Indicator for 540 rpm 9. Headlight Indicator
10. PTO Monitor Indicator for 1000 rpm 11. Tail Lamp Indicator 12. Coolant
Temperature Gauge 13. Temprature Indicator 14. Charge Indicator 15.
Hourmeter 16. Fuel Indicator 17.Electrical preheat Indicator 18.Engine Oil
Pressure Indicator 19.Brake Indicator
To Next Page
Loading...
