404G2 SERIES TRACTOR OPERATION MANUAL
50
(2)Hydraulic lift system and hydraulic output valve cannot be used at the same time.
4.3.3Usethreepointliftingmechanism
These series tractors adopt rear three-point lifting mechanism (as shown in figure 4-18),
proper use and adjust the suspension bar and supporting tools can improve the work
efficiency, reduce working resistance, ensure the quality of cultivation.
• Connecting farm implements
Retreat tractor makes the connecting point close to the farm implemnts, and controls the
lifting handle, so that the left and right lower pull rod can be connected to the farm
implement, and put the pin into the hole and the locked tightly by locking pin. Adjust
the upper pull rod to the suitable length, and use the long pin to connect the hanging
hole of the column of the farm with the locking pin.
Fig.4-18
1.Lift rod locknut 2.Lift rod 3.Limit chain 4.Limit chain locknut 5.Lower pull
rod 6.Lower rod limt spring 7.Upper pull rod 8.Upper rod locknut 9.Lift arm
To Next Page
Loading...
