504G3 SERIES TRACTOR OPERATION MANUAL
54
5. Rapid lift control
When the tractor turnaround in the end of the field or leaves the field or transport, the
rapid lift lever can be used to lift the implement quickly (fig. 4-20). Using the rapid lift
lever can lightening the burden of the driver.
Pull up the rapid lift lever to realize rapid lift. Keep it down when you don’t need this
function.
6 . Control the drop speed of implement
Fig 4-22 1、Rate of Drop Knob 2、Mid-PTO Lever
The rate of drop knob (fig. 4-22) can be used to control the drop speed of implement
and set the implement at desired position. Choose the appropriate drop speed according
to the weight of the implement and the soil condition to avoid too fast to damage the
implement.
The rate of drop knob will control the speed valve directly. Turn the knob clockwise
will slow down the speed and increase the speed otherwise.
Turn the knob until the implement could not be putted down when the tractor transport
for a long distance (Be sure not turn the knob to the death). At this time, any control of
position control lever or draft control lever or rapid lift lever is forbidden.
To Next Page
Loading...
