KNIPEX 97 22 240 - Operating Procedures; Shortening Cables; Stripping Cables

OpEraTiON
7 Status: 26.10.21
4 Operation
4.1 Shortening cables
6.0
4.0
2.5
1.5
ISOL
2.5
1.5
1.5
2.5
6
1.0
0.75
ISO
M3.5
M4
M2.6
M3
M5
2.5
1.5
6
ISO
M3.5
M2.6
1.
2.
Cutting cables
1. Insert the end of the cable to be shortened between the two blades of
the cable cutter.
2. Press the crimping pliers closed.
4.2 Stripping cables
2.5
1.5
6
ISO
M3.5
M4
M2.6
M3
M5
2.5
1.5
6.0
4.0
2.5
1.5
1.0
0.75
ISOL
3.
2.
1.
Stripping cables
1. Select the stripping setting that matches the capacity of the cable
(0.75 ... 6.0 mm²) on the tool and place the end of the cable between
the two stripping blades.
2. Press the crimping pliers closed.
3. Pull the cable out of the pliers.