KNIPEX 97 22 240 - Making an Oval Crimp

OpEraTiON
8 Status: 26.10.21
4.3 Making an oval crimp
6.0
4.0
2.5
1.5
ISOL
2.5
1.5
1.5
2.5
6
1.0
0.75
ISO
M3.5
M4
M2.6
M3
M5
1.5
2.5
6
ISO
M3.5
M2.6
1.5
2.5
6
ISO
M3.5
M2.6
1.
2.
3. 4.
Making an oval crimp
Note:
The conductor and connector must match each other in terms of their ca-
pacitance values. The stripping length and positioning of the conductors
in the connector must meet the respective requirements of the different
connectors.
1. Select a crimp prole that matches the (insulated) terminal/plug
type connector (red = 0.5 ... 1.5 mm², blue = 2.5 mm², yellow =
4 ... 6 mm²).
2. Place the terminal / plug type connector in the selected crimp prole.
3. Insert the conductor into the terminal / plug type connector. Note the
correct positioning.
4. First crimp the stripped area of the conductor by pressing the crimping
pliers closed.
5. Next crimp the insulated area a second time.