Need help?Do you have a question about the KnTech KNZD-63 and is the answer not in the manual?
Step 1: Connect the IP Phone to the corporate IP telephony network.
Instructions for configuring the phone via a web interface.
Detailed configuration options accessible through the web interface.
Configure SIP account details like IP address, port, account name, and password.
Settings for network, phone, security, time, and language.
Set connection type, auto-negotiation, and network port settings.
Configure auto-answer, ringer tone, volume, and voice codecs.
Supports 2 output settings and modifications to output level and trigger mode.
Includes rebooting, saving/uploading configuration files, and system upgrades.
Set the IP address of the network port to a fixed IP for point-to-point communication.
Configure phone number, display name, and account name for SIP registration.
Add call paths and rules for dialing other IP phones by number and IP address.
General| Ethernet Ports | 1 x 10/100Mbps |
|---|---|
| Power | PoE (IEEE 802.3af) |
| Protocols | SIP, RTP |
| Network Interface | 10/100 Mbps Ethernet |
| Audio Codecs | G.711, G.729 |
| Power Supply | PoE |
| Humidity | 10% to 95% non-condensing |
To Next Page
