CoolAdd
®
Manual / Bedienungsanleitung
CoolAdd 01.998.350.0 issue a page / Seite 21/59
• Replacement of fans (the normally expected servi ce life is approx. 40.000
operati ng hours
at a temperature of 40°C / 104°F)
- each fan can be changed individually
- before changing the fan shut down the power connection of the fan
- unfix the fastening screws of the fan to be replaced
- disconnect the connecting cables
- remove fan
• The new fan is installed in the reverse order of removal.
- connect the fan control cabl e
- tighten the fan fixing screws
- close the unit and place back in operation
Dispose of the old fans correctly!
Fans replacement
grips
To Next Page