CoolAdd
®
Manual / Bedienungsanleitung
CoolAdd 01.998.350.0 issue a page / Seite 4/59
1.2. Safety instructions
Our engineers will provide comprehensive advice on how to install
CoolAdd.
Extensive material, function and quality checks ensure that you
benefit full y from the product and that the product has a long service
life. Nevertheless, thi s machine can produce hazards if it is used
incorrectly by untrained personnel or is not used for the correct purpose
Prior to commissioning the CoolAdd, read these
operating instructions carefully.
The electrical equipment complies wi th the applicable VDE and acci dent prevention
regulations. Hazardous voltages (greater than 50 V AC or greater than 100 V DC)
are present:
→ Behi nd the server cabinet doors
→ On the power supply i n the unit's housing
Use only original fuses with the correct rating.
Immediately shut down the unit if there are problems with the supply of electrical
power or supply of cold water.
Risk of electric shock
Repair and cleaning work should only be performed only
qualified staff.
The staff must ensure that the unit is electrically isolated
whilst it is serviced and cleaned. For this reason shut down
theunitbeforestartingwork.
Risk due to incorrect work on the unit.
Cleaning and servicing is only allowed to be performed by
qualified staff. To ensure that the unit remains
safe to use and has a long service life, it is imperative
that you observe the maintenance and cleaning intervals.
To Next Page
Loading...