CoolAdd
®
Manual / Bedienungsanleitung
CoolAdd 01.998.350.0 issue a page / Seite 5/59
Only operate the CoolAdd correctly within the correct
rati ngs and with approved equipment.
.
During all work on and with the unit, observe:
• The related applicable regulations (e. g. VDE regulations or
other applicable national regulations)
• The applicable accident prevention instructions (BGV)
• The applicable rules
• The applicable laws on the protection of the environment
Only operate the unit if it is in correct working condition. On the
occurrence of malfunctions or faults, you must shut down the unit
immediately and inform the responsible member of staff
in the operating organisation.
You are onl y al lowed to use the unit again after its correct functi on
has been re-establi shed.
Caution hot surface
Faulty fans, power supplies, control circuit boards can run hot.
Prior to starting work, leave these to cool down.
To Next Page
Loading...