CoolAdd
®
Manual / Bedienungsanleitung
CoolAdd 01.998.350.0 issue a page / Seite 20/59
5.6 Sealing of cabinet
To ensure optimal cooling a floating seal is provided between the CoolAdd an the
exi sting cabinet.
The gap between CoolAdd door und cabinet has to be closed by the seal.
6. Service and maintenance
Servici ng and maintenance work is to be performed by
correctly trained personnel only, and i n accordance with the
related regulations as well as the manufacturer’s specificati ons!
Only use original spare parts that have been tested and approved by us
(If necessary, request a compl ete list of spare parts from the
manufacturer)
For cleaning use only commercially avail able cleaning agents while
observing the stipulated safety measures and do not use any tools that
cause may scratching or tools for scraping (surface treatment will be
irreversibly damaged!)
Prior to all servicing work:
- correctly shut down fans and any other electrical
components and isolate from the power supply
- wait until the fan blades have stopped!
- secure against switch on
- Shut down the water cooling circuit and secure against
switch on
• General inspection on fans (annually)
- Check for unusual bearing noises (Check for excessive bearing play)
To Next Page
Loading...