WERKZEUGMASCHINEN Operating instructions
KKS 250 / 315 / 350 6/29
3 Security instruction
Operation manual
For your own security read the operation manual before starting the machine. The
operation manual should be kept in a secure place. You should know about how to
handle the machine, its limits and it’s specific dangers.
Keep your working place clean
Disorder on your working place will result in danger. Take care that your working
place is free from chips and dirt. Use only the right tools to clean your machine from
chips. Keep your working place free from obstacles.
Check if there are any damages at the machine
Before you start the machine check the function of the security equipment. Check the
function of all movable parts. All parts have to be mounted correctly. Damaged
security parts should be repaired or exchanged by the after sales service.
Take care about outer conditions
Don’t use the machine in dangerous areas. Take care, that electrical parts don’t get
humid or wet. Work only with a good illumination.
Don’t use electrical parts near flammable fluids or gas.
Protect yourself from electric shock
Don’t remove mechanical or electrical security parts. Check if all security parts are
mounted and adequately functioning.
Wear only suitable clothes
Don’t wear large clothes, wristwatches or jewels. For your own security wear always-
working shoes while working. If you have long hair always wear a hairnet. While
working with the machine you have to wear security glasses. If you work under dusty
conditions you have to wear a dust protection-breathing mask.
Keep incompetent persons away from the working area
Take care, that there are no persons in your working area witch could be exposed to
danger. Children and visitors should be kept in a secure distance to the working area.
Keep children away from the machine.
Don’t let other people touch the machine or the cable of the machine.
Make sure that only authorised persons can reach the workshop.
To Next Page
Loading...
General