Ko Propo EX-NEXT - TLMY Telemetry - Battery Fail-Safe; Battery Fail-Safe Configuration; Voltage Level Settings

40
BT F/S Battery fail safe
Set the battery fail-safe.
TLMY Telemetry
TELEMETRY
RELICSRESP
RFMODE
BT F/S
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
BATTERY FAIL SAFE
CURREN :
ALERT :
FAIL SAFE :
ALERT MODE: VIBRATOR
MINIMUM :
MAXIMUM :
0.0V
5.8V
0.0V
0.0V
6.0V
CLR
CURRENT
(Current battery voltage of receiver)
ALERT
(Aleart start voltage setting)
Setting Range
3.0 - 8.5V(Default : 5.5V)
FAIL SAFE
(Battery fail safe start voltage setting)
Setting Range
3.0 - 8.5V(Default : 5.0V)
ALERT MODE
(Alert mode setting)
Setting Range
VIBRATOR, BUZZER VIBRATOR + BUZZER
(Default : VIBRATOR)
MINIMUM
(Minimum voltage of receiver battery)
MAXIMUM
(Maximum voltage of receiver battery)
CLR
(Read data again)
The battery fail-safe function is a function that can be set to
automatically decelerate or brake when the voltage of the receiver
battery falls below the set voltage.When the fail-safe function is
activated, the automatically set servo is operated to an arbitrary
position (the position set by the fail-safe function on p.21).
When the voltage is restored, the battery fail-safe function will be
automatically canceled.
* The battery fail-safe function is intended to prevent accidental
use of a damaged receiver battery.
We do not recommend using it as a protective function when
the normal receiver battery is exhausted.
* This is a function exclusively for engine cars. Do not use the
battery fail-safe function in an electric car.
BT F / S can be used to check the ESC voltage.
You can check the minimum voltage and maximum voltage and
use it to judge whether the ESC BEC is normal.
P
P
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
BATTERY FAIL SAFE
CURRENT :
ALERT :
FAIL SAFE :
ALERT MODE: VIBRATOR
MINIMUM :
MAXIMUM :
8.1V
OFF
7.1V
8.2V
5.5V
CLR
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
BATTERY FAIL SAFE
CURRENT :
ALERT :
FAIL SAFE :
ALERT MODE: VIBRATOR
MINIMUM :
MAXIMUM :
8.1V
6.0V
7.1V
8.2V
5.8V
CLR
TIMER タイマー
TIMER
OFF
OFF
TIMER START
TRG START
LAP HISTORY
START/STOP KEY
LAP KEY
BATTERY FAIL SAFE
CURRENT :
ALERT :
FAIL SAFE :
ALERT MODE:
MINIMUM :
MAXIMUM :
8.1V
6.0V
5.8V
7.1V
8.2V
VIBRATOR
CLR
Reference value : Life 5.2V Lipo 6.0V
VIBRATOR or BUZZER will notify you when the voltage drops
below the set voltage.
Reference value : Life 5.0V Lipo 5.8V
If the voltage drops below the set voltage, the fail-
safe function will operate.
VIBRATOR(recommended)
Or set it to BUZZER.
This setting is reected in the ALERT operation.