14
CARE AND MAINTENANCE
Cleaning
1. Clean using a mild liquid soap, rinse with clean water and dry thoroughly. Do not clean with
abrasive detergents.
2. Clean off water or other liquids spilled or splashed on the workbench immediately and dry the
unit thoroughly.
3. Keep your workbench covered to protect it from dust and moisture that could potentially damage
the unit.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The tools plugged into the
power strip do not work.
The power cord plugs are
loose.
Ensure the power cord plugs
are plugged in properly.
The lamp tube is old. Replace the lamp tube.
The light does not work. 1. The lamp plug is loose.
2. The lamp tube is old.
1. Ensure the power cord plug is
plugged in properly.
2. Replace the lamp tube.
To Next Page
Loading...
