4
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
SPM Strokes per minute
The number of back-and-forth strokes the blade makes per
minute
Alternating Current Type of current
Direct Current Type or a characteristic of current
Wet Conditions Alert Do not expose to rain or use in damp locations
Read the Operator’s
Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Safety Alert Precautions that involve your safety.
Keep Bystanders
Away
Keep all bystanders at least 50 ft. away.
Wear eye protection
Wear eye protection with side shields that are marked to
comply with ANSI Z87.1 when operating this equipment.
Sharp Blade Keep hands away from sharp, moving blades.
Gloves Wear non-slip, heavy duty gloves.
To Next Page
Loading...
Need help?
General