To Next PageTo Next PageWhy is my Kobalt KMC 124B-03 Saw motor overheating?
If the motor of your Kobalt Saw is overheating, it's likely because the cooling vents are blocked. Make sure to clean and clear the vents. Also, avoid covering the vents with your hand while you're using the saw.
Why wheels cannot be installed on Kobalt KMC 124B-03?
If the wheels cannot be installed on your Kobalt Saw, it may be because the wheel is the wrong size. Check the specification chart to determine the correct wheel size.
Guidance on understanding the tool and its labels before operation for safe use.
Essential safety rules covering general warnings, work area, and electrical precautions.
Advisories for personal safety, proper tool use, and battery care during operation.
Safety precautions for grinding, polishing, cutting-off, and kickback prevention.
Overview of the saw's capabilities and a recommendation to familiarize with features and safety.
Steps to attach/detach battery and operate the paddle switch for tool control.
Details on attaching/removing guards, handles, and dust exhaust adapters.
Procedures for installing/removing accessories and adjusting cutting depth.
Guidance on general cutting, plunge cutting, and flush cutting for various materials.
Instructions for cleaning the tool and storing wheels properly for longevity.
General