Kobalt KCS 124B-03 - User Manual

48 pages

To Next Page

AS22034

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

ITEM #4913883

6-1/2 INCH BRUSHLESS

CIRCULAR SAW

MODEL #KCS 124B-03

Español p. 23

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 888-3KOBALT (888-356-2258), 8 a.m.-8 p.m., EST,

Monday-Sunday. You could also contact us at partsplus@lowes.com.

KOBALT and logo design are trademarks or

Questions and Answers

S
Stephanie WallaceAug 5, 2025
What to do if my Kobalt Saw cut binds, burns, or stalls motor when ripping?
- R
  Ryan WagnerAug 5, 2025
  If your Kobalt Saw experiences binding, burning, or motor stalling during ripping, several factors could be at play. It might be due to a dull blade with an improper tooth set, in which case you should discard the blade and use a different one. Blade binding could also be the culprit; reassemble the blade and tighten the blade bolt. Ensure proper workpiece support by clamping or supporting it correctly.
B
boyledeannaAug 20, 2025
Why is my Kobalt KCS 124B-03 vibrating or shaking?
- H
  halljohnAug 20, 2025
  If your Kobalt Saw is vibrating or shaking, this could be due to a blade that is out of balance, so you should discard the blade and use a different one. The blade might also not be installed properly; remove the blade and reinstall it, making sure no part is missed. Also, ensure that the workpiece is properly supported by clamping or securing it.

Kobalt KCS 124B-03 Specifications

General

Brand	Kobalt
Model	KCS 124B-03
Category	Saw
Language	English

Summary

Product Specifications

Package Contents

Safety Information

Know the Tool

Read this manual and all labels affixed to the tool before using it for proper operation.

Important

This tool should be serviced only by a qualified service technician for maintained safety.

Read All Instructions Thoroughly

Study and understand the meaning of symbols used on the tool for better and safer operation.

General Power Tool Safety Warnings

Read all safety warnings, instructions, illustrations, and specifications provided with the power tool.

Work Area Safety

Keep work area clean and well lit; do not operate in explosive atmospheres; keep children and bystanders away.

Electrical Safety

Match power tool plugs to outlets; avoid body contact with earthed surfaces; do not expose to rain or wet conditions.

Personal Safety

Stay alert, watch what you are doing, use PPE like eye protection, dust masks, and safety shoes.

Prevent Unintentional Starting

Ensure the switch is in the off-position before connecting power or battery pack.

Power Tool Use and Care

Do not force the tool, use the correct tool for the application, maintain tools, and keep them clean.

Battery Tool Use and Care

Recharge only with the specified charger and use only designated battery packs.

Service

Have power tool serviced by a qualified repair person using identical replacement parts.

Safety Instructions for All Saws

Follow specific safety guidelines for circular saws, including cutting procedures and kickback prevention.

Preparation

Know Your Circular Saw

Familiarize yourself with the circular saw's operating features and safety requirements before use.

Operating Instructions

Attach Battery Pack

Align raised portion with grooves and slide battery pack into slot until latches snap into place.

Trigger Switch

Press lock-off button (A), then squeeze trigger switch (B) to turn ON; release to turn OFF.

Electric Brake

The saw is equipped with an electric brake that stops rotation automatically when the trigger is released.

Saw Blades

Keep blades clean, sharp, and properly set for efficient cutting and to avoid kickback.

Installing a Saw Blade

Remove battery, depress spindle-lock, loosen bolt, remove flanges, and fit blade onto spindle.

Removing the Saw Blade

Remove battery, depress spindle-lock, loosen bolt, remove flanges, retract guard, and remove blade.

Blade Guard System

Ensure the lower blade guard operates freely and returns instantly to the closed position.

Adjusting the Cutting Depth

Pinch depth-locking lever, align indicator on saw with depth scale, and release lever to lock.

Adjusting the Bevel Angle

Loosen bevel-locking lever, tilt saw body to align indicator with scale, and tighten lever to secure.

LED Work Light

The LED work light illuminates the workpiece surface when the trigger switch is depressed.

Using the Vacuum Adapter

Attach a 1-1/4 in. vacuum hose to the adapter to keep the work area clean.

Cutting with the Circular Saw

Hold saw firmly, support workpiece, clamp securely, and place saw on supported portion.

Cross-Cutting;Rip Cutting

Align guideline with 0° notch; make trial cuts to determine guideline offset for accuracy.

Rip Cutting Using a Straight Edge

Secure workpiece, clamp straight edge, guide saw along edge for accurate parallel cuts.

Rip Cutting Using the Edge Guide

Slide edge guide into slot, adjust to desired width, clamp workpiece, and guide saw.

Bevel Cutting

Adjust bevel angle, align cutting line with 45° notch, make trial cut, and guide saw.

Pocket Cutting

Adjust bevel to 0°, set depth, swing guard up, use front foot as hinge to lower saw into material.

Cutting Large Sheets

Support large sheets properly close to the cut to prevent blade binding and kickback.

Care and Maintenance

Cleaning

Remove battery pack before cleaning. Use a soft, dry cloth to clean the tool and ventilation slots.

Troubleshooting

Warranty

Related product manuals