To Next Page
L
lsantosAug 9, 2025
Why does the blade bind, jam, or burn wood when using my Kobalt KRS 224B-03?
- SStephen MartinAug 9, 2025
If the blade binds, jams, or burns the wood when using your Kobalt Saw, it could be due to improper operation. Refer to the “OPERATING INSTRUCTIONS” section for guidance. Alternatively, the blade may be dull and require replacement or sharpening. It is also possible that the blade is not appropriate for the task and should be replaced with a suitable one.
General
