12
To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach when
operating grass trimmer/edger. Keep proper balance at all times for better control of the tool in
unexpected situations.
4. Front handle
a. Position the front/auxiliary handle (E) onto the
upper portion of the trimmer section by sliding over
the upper tube (J).
b. Once auxiliary handle is in the desired position,
tighten the fastening knob (BB) until there is no
movement in the handle.
c. The auxiliary handle can be adjusted to a suitable
position.
Note: Do not overtighten the fastening knob. It could
cause the fastening clamp to break.
ASSEMBLY INSTRUCTIONS
WARNING
Hardware Used
Fastening knob
x 1
4
To Next Page
Loading...
Need help?
General