8
SAFETY INFORMATION
RISK OF PERSONAL INJURY
WARNING
WHAT COULD HAPPEN HOW TO PREVENT IT
There is a risk of bursting if the tool
is damaged.
Poor quality, improper or damaged
attachments can detach or fly apart
during operation, sending projectiles
through the work area and causing
serious injury.
Improperly maintained tools and
accessories can cause serious
injury.
Using an accessory not intended for
a specific tool increases the risk of
injury to the operator and everyone
else in the work area.
Repetitive motions, awkward
positions.
Can be harmful to hands and arms.
Discontinue use of tool if discomfort,
tingling feeling or pain occurs.
Consult a physician before resuming
use if any of these symptoms occur.
Always use accessories and
attachments designed for the tool
and the work at hand.
Do not improvise or modify tools or
accessories.
Maintain the tool and accessories
with care.
Do not abuse hoses or connectors.
Keep hoses away from heat, oil and
sharp edges.
Always check air hoses for weak or
worn connections before each use
and make certain that all connections
are secure.
Do not use pressure exceeding the
recommended operating pressure of
the lowest rated system component
(hoses, fittings, etc.).
Do not modify tools or attachments.
Always follow assembly, operation,
maintenance and repair instructions.
INHALATION HAZARD
WARNING
WHAT COULD HAPPEN HOW TO PREVENT IT
Paint spraying tools generate paint
vapors which can be harmful to the
lungs and respiratory system.
Abrasive tools such as grinders,
sanders and cut-off tools generate
dust and abrasive materials which
can be harmful to the lungs and
respiratory system.
Wear a respirator in accordance with
ANSI Z88.2.
To Next Page
Loading...
Need help?
General
