To Next PageTo Next PageWhat to do if liquid leaks from the connection joints of Kobalt KBSP 1040B-03?
If you notice liquid leaking from the connection joints of your Kobalt Paint Sprayer, it's likely that the end caps of the connection joints aren't screwed on tightly enough or the o-ring is damaged. Try tightening the end caps first. If the leak persists, you might need to replace the o-ring.
General| Product Type | Airless paint sprayer |
|---|---|
| Maximum Pressure | 3000 PSI |
| Voltage | 120 V |
| Power Source | Electric |
| Spray Tip Size | 0.015 in |
| Hose Length | 25 feet |
Key safety precautions for operating the power tool, including eye protection.
General safety precautions to follow when using any electrical appliance.
Guidelines for the safe and proper use and charging of the battery pack.
Crucial safety warnings specific to operating a sprayer with chemicals.
Step-by-step instructions for attaching and detaching the battery pack to the sprayer.
How to turn the sprayer on/off and control the flow of liquid.
Guidance on how to spray home and garden chemicals effectively and safely.
