2
2-27
ï¼»2. MACHINE FAMILIARIZATIONï¼½
2.3.12 WORK MODE SELECTION
Jog dial operation
Tilting (a,b,c,d) and rotating (e,f) the jog dial
To move the cursor on the monitor and adjust the values
and others.
Pushing down (g) the jog dial
• To switch the screen to the selected setting screen.
• To determine the adjusted value and others.
Select a proper work mode from three modes shown
below according to the work condition and purpose.
Move the cursor to [work mode selection] (8) and push
down (g) the jog dial to switch the mode.
S mode:
"S mode" is suitable for a standard digging work and
loading operations. It provides good fuel consumption
and is well-balanced with a workload.
ECO mode:
"ECO mode" focuses on reduced fuel consumption
operation.
H mode:
"H mode" is suitable for a heavy digging work, which
provides high speed and gives priority to a workload.
Before beginning the work, make sure the selected work mode is correct.
Copyright©2020 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YY00041ZE03] [0701CsCshWbYs]