3
3-21
ï¼»3. MACHINE OPERATIONï¼½
3.3.2 START UP IN COLD CONDITIONS
In cold weather, due to increase in oil viscosity and decrease in battery performance, starting the engine may be
difficult.
For the engine start up procedures with the automatic warming-up system, see "USER MENU SETTING" in
Chapter 2.
1. Make sure the control lock lever (1) is in the
"LOCKED" position.
A: "LOCKED" position
B: "UNLOCKED" position
2. Make sure all control levers are set to the
"NEUTRAL" positions.
3. Turn engine throttle (2) to the low idle position.
4. Turn the key of starter switch (3) to the "ON" position
and hold the position.
When the coolant temperature decreases below 10
degrees C (50 degrees F), the glow plug is
preheated automatically by the engine coolant
temperature sensing.
5. Also check the operation of the monitor.
6. After having completed the preheating (within five
seconds), turn the key of starter switch (3) to the
"START" position to start the engine.
7. Release key (3) immediately after the engine starts.
The starter key will return to the "ON" position by
itself.
Copyright©2020 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YY00041ZE03] [0701CsCshWbYs]
To Next Page
Loading...
Need help?
General
