6505 Control Head Kobelt Manufacturing Co. Ltd.
Rev A mnl6505.docx 12 of 18
5.5 RECOMMENDED SPARE PARTS AND KITS
The spare parts kept on hand will depend on the severity of the service. The User should monitor the
condition of their control head to predict necessary spare parts and ensure they are on hand when
needed. As a minimum Kobelt recommends keeping the following parts for each brake in service:
1. One friction kit
2. One detent kit
3. One potentiometer
When purchasing spare parts refer to Appendix B at the back of this manual for Kobelt component Part
Numbers.
It is recommended that any required service work on a
Kobelt unit be performed by a factory authorized service
representative. Please contact the nearest Kobelt authorized
distributor for assistance.
To Next Page
Loading...