6505 Control Head Kobelt Manufacturing Co. Ltd.
Rev A mnl6505.docx 5 of 18
• Only use authentic Kobelt spare parts.
• Observe all local regulations, directives and laws during the installation of this product.
• All installation, commissioning, and maintenance work must only be conducted by qualified
personnel. (For the purpose of this manual, qualified personnel are persons who are familiar with
the assembly, installation, commissioning, and operation of the product and who have the
qualifications necessary for their occupation.)
• Observe all specifications in this manual. If these guidelines are not followed and damage occurs,
the warranty will be voided.
1.2.3 Product Hazards
Equipment Starts Automatically:
Equipment may activate suddenly while servicing this
product, causing bodily harm. Ensure that all power
sources are locked out prior to performing work.
Pinch Points:
The 6505 control head contains pinch points, which can
cause bodily harm. Ensure that hands and fingers
remain clear of the pinch points when performing work.
To Next Page
Loading...