Kodak 6850 - Installing the Trim Tray; Installing the Print Catcher

1-4 May 4, 2005
Setting Up the Printer
3. Remove the packing material.
Installing the Trim Tray
The trim tray collects paper trimmings that are generated when the printer
cuts the prints.
• Slide the trim tray into the printer as shown.
CAUTION:
There are sharp cutter blades inside the printer. Do not insert
hands or objects.
IMPORTANT: To keep your prints dust-free and to prevent paper jams,
empty the trim tray each time you change the paper.
Installing the Print Catcher
The print catcher collects the finished prints as they exit the printer.
• Attach the print catcher from the print exit slot as shown.
Trim tray
Print exit
slot
Print
catcher