Kodak 6850 - Connecting the USB Cable; Turning On the Printer

1-8 May 4, 2005
Setting Up the Printer
Connecting the USB
Cable
Use the included USB cable.
1. Check that the power switch is turned off ( ).
2. Connect the USB cable to the USB connector on the back of the printer
and to the USB connector on the computer.
Turning On the Printer
1. Press the power switch to on ( | ).
On the operator panel, the orange Power light and the green Ready
light illuminate, and the Ready message appears when the printer is
initialized.
2. To turn off the printer, press the power switch to off ( ).
OFF
OFF
ON