Kodak COLORBURST 250 - Troubleshooting Common Issues; Image Quality Problems; Flash and Exposure Errors

Troubleshooting Guide
Wh al Happened
Probable Cause Correclion
t
Pictures fuzzy, hazy,
a. Camera movement.
a.
Hold camera steady;
or misty.
press
shutter release
smoothl
y. When red
caution I
ight comes on
to
indicate exposure will
be longer than 1/15
second, brace camera
firmly or place it on
tr ipo d.
b.
Subjec t moveme nt . b. Subject s hould be
stationary, moving slowly
in
bright sunlight , or
moving toward or away
from you (not at
right
angle to camera).
c.
Dirty camera lens. c. Clean lens (page 15).
d. Flare from very bright d. Don 't point camera
l
ight shining directly into directly at sun or other
lens.
ex tr emely bright light.
Dayl
ight pictures
a. Shutter release not
a.
Be sure to keep
too dark.
ful ly held
down until
shutter release full y
caution
light went out
depressed until caution
(extended ex
posur es). light goes out.
b. Lighten/ darken
contro l
b. Adjust
contro l
not in
proper position .
(page
8) .
c. Temperature too high
c. See temperature
during development.
recommendations on
page 8.
d. Print placed on hot d. Never leave
print on
surface
or in direct sun-
hot
su rface or in direct
light during development .
sunlight during
deve lopment.
17