13
Problem Cause Solution
Part of the image is missing. Something was blocking the
lens when the image was
captured.
Keep hands, fingers,
or other objects away from the
lens when capturing images.
Your eye or the image was not
centered correctly in
viewfinder.
Leave space around subject
when centering image in
viewfinder.
Stored images are damaged. The battery was inserted or
removed when the Power,
Busy, or Memory Full lights
were still lit.
Make sure the Power, Busy,
and Memory Full lights are off
before inserting or removing
the battery.
Blurred images Subject too close. Stand at least 2 feet away.
Subject or the camera moved
while image was captured.
Hold camera steady until you
hear the shutter click. In low
light the camera clicks twice.
Power, Busy, and Memory Full
lights simultaneously turn on
and the Shutter button jams.
Static electricity or
inappropriate operation.
Turn the camera off and
remove the battery. Wait 1
minute, return battery to
camera, and turn camera on.
If the difficulties persist, refer to the Where to Get Help section of this user’s guide.
To Next Page
Loading...
Need help?
General
