Kodak DC290

80
Not enough memory There is not enough
memory on the card to
store the selected
time-lapse picture
sequence.
Transfer pictures to
your computer or
insert a memory card
that has available
memory. You can also
change the Time-lapse
sequence to one that
requires less memory.
E11 Corrupted firmware. Have the camera
serviced.
Memory card is
inserted incorrectly or
is damaged.
Turn the camera off,
and remove the
memory card. Inspect
it for damage. If
damaged, replace the
card. Insert the
memory card into the
camera.
LCD Messages
Problem Cause Solution